Cisco 7800 Series Administration Manual page 229

Cisco IP Phone Troubleshooting
Parameter
Next Registration In Seconds
Message Waiting
Mapped SIP Port
Hoteling State
Extended Function Status
Line Call Status
Parameter
Call State
Tone
Encoder
Decoder
Type
Remote Hold
Callback
Mapped RTP Port
Peer Name
Peer Phone
Duration
Packets Sent
Packets Recv
Bytes Sent
Bytes Recv
Decode Latency
Jitter
Description
Number of seconds before the next registration
renewal.
Indicates whether message waiting is enabled or
disabled.
Port number of the SIP port mapped by NAT.
Indicates whether Hoteling is enabled or disabled.
Indicates whether extended function is enabled.
Description
Status of the call.
Type of tone that the call uses.
Codec used for encoding.
Codec used for decoding.
Direction of the call.
Indicates whether the far end placed the call on hold.
Indicates whether the call was triggered by a call back
request.
The port mapped for Real Time Protocol traffic for
the call.
Name of the internal phone.
Phone number of the internal phone.
Duration of the call.
Number of packets sent.
Number of packets received.
Number of bytes sent.
Number of bytes received.
Number of milliseconds for decoder latency.
Number of milliseconds for receiver jitter.
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
Line Call Status
215