Cisco 7800 Series Administration Manual page 298

Call Feature Settings
Parameter
Auth Page
Default Ring
Auth Page Realm
Conference Bridge URL
Auth Page Password
Mailbox ID
Voice Mail Server
Voice Mail Subscribe Interval
Auto Ans Page On Active Call
Feature Key Sync
Call Park Monitor Enable
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
284
Cisco IP Phone Troubleshooting
Description
Specifies whether to authenticate the invite before
auto answering a page.
Default: No
Type of ring heard. Choose from No Ring or 1 through
10.
Ring options are Sunlight, Chirp 1, Chirp 2, Delight,
Evolve, Mellow, Mischief, Reflections, Ringer,
Ascent, Are you there, and Chime.
Identifies the Realm part of the Auth that is accepted
when the Auth Page parameter is set to Yes. This
parameter accepts alphanumeric characters.
URL used to join a conference call, generally in the
form of the word conference or user@IPaddress:port.
Identifies the password used when the Auth Page
parameter is set to Yes. This parameter accepts
alphanumeric characters.
Identifies the voice mailbox number/ID for the phone.
Identifies the SpecVM server for the phone, generally
the IP address, and port number of the VM server.
The expiration time, in seconds, of a subscription to
a voice mail server.
Determines the behavior of the phone when a page
call arrives.
Enable the synchronization of settings between the
line and the server if necessary.
Feature Key Sync must be enabled for lines that are
configured for the following functions or users:
• Call forward all
• DND
BroadSoft server-only feature. If call park is enabled
on the server or on any of the programmable line keys,
you need to enable this field for call park notification
to work.
Default: No