Enable Users To Configure Features On Line Keys - Cisco 7800 Series Administration Manual

Cisco IP Phone Administration
Feature Name
Divert
Do Not Disturb
Hold
Intercom
Mute
Redial
Speed Dial
Speed Dial Line Status
Transfer

Enable Users to Configure Features on Line Keys

You can enable users to configure these features on line keys:
• Speed dial
• Busy Lamp Field (BLF) to monitor a coworker's line, with the following options:
Users can select any available line keys to configure features. They can also select a line key that is functioning
as a speed-dial key or as a BLF key. The user's configuration will override any existing configuration for the
line key. Users cannot select line keys on which you have configured other features. If a user selects a BLF
list key, the phone adjusts the positions of the BLF list keys using the next available line keys.
For the BLF feature options, the phone subscribes to the BLF list URI that you specify (XML parameter
BLF_List_URI
URI, the phone subscribes to
Procedure
Step 1 On the phone administration web page, go to Admin Login > Advanced, Voice tab.
Step 2
To allow features, go to Att Console > General, and configure Customizable PLK Options as described in
General, on page
Step 3
To enable feature configuration on a line key on the phone, do one of the following:
Dedicated Feature Button
X
X
X
• Speed dial to the monitored line
• Call pickup from the monitored line
), to be notified of changes in the status of the monitored lines. If you do not specify a BLF list
$USER@$PROXY
299.
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
Enable Users to Configure Features on Line Keys
Programmable Feature
Button
X
X
X
X
X
.
Softkey
X
X
X
X
X
X (only displayed during
connected call transfer
scenario)
157