Cisco 7800 Series Administration Manual page 287

Cisco IP Phone Troubleshooting
Parameter
XML Password
CISCO XML EXE Enable
CISCO XML EXE Auth Mode
Multiple Paging Group Parameters
Feature
Group Paging Script
LDAP
Parameter
LDAP Dir Enable
Corp Dir Name
Server
Description
Enter a string to configure group paging and priority paging (out of band paging) that
doesn't require the phone registration.
Description
Choose Yes to enable LDAP.
Default: No
Enter a free-form text name, such as "Corporate Directory."
Default: Blank
Enter a fully qualified domain name or IP address of an LDAP
server in the following format:
nnn.nnn.nnn.nnn
Enter the host name of the LDAP server if the MD5 authentication
method is used.
Default: Blank
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
Multiple Paging Group Parameters
Description
XML service password for authentication purposes
Default: Blank
Enables or disables Cisco XML EXE authentication.
Default: No
Specifies the authentication mode for Cisco XML
EXE. The available options are:
• Trusted—No authentication is performed (local
user password is set or not).
• Local Credential—Authentication is based on
digest authentication using the local user
password, if the local user password is set. If not
set, then no authentication is performed.
• Remote Credential—Authentication is based on
digest authentication using the remote
username/password as set in the XML
application on the web page (to access an XML
application server).
Default: Trusted
273