Cisco 7800 Series Administration Manual page 288

LDAP
Parameter
Search Base
Client DN
User Name
Password
Auth Method
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
274
Description
Specify a starting point in the directory tree from which to search.
Separate domain components [dc] with a comma. For example:
dc=cv2bu,dc=com
Default: Blank
Enter the distinguished name domain components [dc]; for
example:
dc=cv2bu,dc=com
If you are using the default Active Directory schema
(Name(cn)->Users->Domain), an example of the client DN
follows:
cn="David Lee",dc=users,dc=cv2bu,dc=com
cn="David Lee",dc=cv2bu,dc=com
username@domain is the client DN format for a Windows server
For example, DavidLee@cv2bu.com
Default: Blank
Enter the username for a credentialed user on the LDAP server.
Default: Blank
Enter the password for the LDAP username.
Default: Blank
Select the authentication method that the LDAP server requires.
Choices are:
None—No authentication is used between the client and the server.
Simple—The client sends its fully-qualified domain name and
password to the LDAP server. Might present security issues.
Digest-MD5—The LDAP server sends authentication options
and a token to the client. The client returns an encrypted response
that is decrypted and verified by the server.
Default: None
Cisco IP Phone Troubleshooting