Cisco 7800 Series Administration Manual page 159

Cisco IP Phone Administration
Macro Name
MA
MAU
MAC
PN
PSN
SN
CCERT
IP
EXTIP
SWVER
HWVER
PRVST
UPGST
UPGERR
PRVTMR
Macro Expansion
MAC address using lowercase hex digits (000e08aabbcc).
MAC address using uppercase hex digits (000E08AABBCC).
MAC address using lowercase hex digits with a colon to separate hex digit pairs
(00:0e:08:aa:bb:cc).
Product Name; for example, IP Phone 7861.
Product Series Number; for example, 7861.
Serial Number string; for example, 88012BA01234.
SSL Client Certificate status, installed or not installed.
IP address of the phone within its local subnet; for example, 192.168.1.100.
External IP of the phone, as seen on the internet; for example, 66.43.16.52.
Software version string; for example, 2.0.6(b). Use the software version string to
compare against the current phone's firmware load, with one of the following methods:
• With quotes, "$SWVER"–Variable acts as a string in firmware load name
comparisons. For
"$SWVER" eq "sip8845_65.1-0129-18-0356dev.loads"
phone model number and load number are part of the comparison.
• Without quotes, $SWVER–Variable is parsed to determine a build number, plus
major, minor, and micro revision numbers. For example, when the
sip88xx.11-1-1MSR-1dev.loads
firmware names are parsed, the result ignores the model number and load number.
The result for both firmware names yields a major revision=
micro revision= , and build number=
1MSR
Hardware version string; for example, 1.88.1.
Provisioning State (a numeric string):
• -1 = explicit resync request
• 0 = power-up resync
• 1 = periodic resync
• 2 = resync failed, retry attempted
Upgrade State (a numeric string):
• 1 = first upgrade attempt
• 2 = upgrade failed, retry attempt
Result message (ERR) of previous upgrade attempt; for example, http_get failed.
Seconds since last resync attempt.
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
and
sip8845_65.11-1-1MSR-1dev.loads
, minor revision=
1
.
1
Macro Variables
, the
,
1
145