Cisco TelePresence System Series Hardware Upgrade Manual page 98

Upgrading a CTS 3000 to a CTS 3200
Step 9 Attach the brackets to the new primary codec.
6
5
Insert the new codec into the display stand from the rear of the display assembly and secure it with the
Step 10
screws.
Re-attach the cables for the primary codec.
Step 11
You connect the cables to the new primary codec the same as the existing primary codec with the
Note
exception of the left and right microphone cables. You attach those cables to the audio/video extension
unit in the
Cisco TelePresence System
6-32
4
"Attaching and Routing Cables" section on page
Chapter 6 Options for the Cisco TelePresence System 3000, 3010, 3200, and 3210
1
6-88.
OL-16441-01