Cisco TelePresence System Series Hardware Upgrade Manual page 82

Cisco TelePresence Presentation Codec
• For a Cisco TelePresence system installation that uses an optional document camera, external
display, or HDMI splitter for multiple video displays, use the following wiring diagram for the
presentation codec. If you have an Auxiliary Control Unit, substitute the signal cabling between the
presentation codec and the primary codec with the alternate cabling for the Auxiliary Control Unit.
For a list of the external displays that Cisco TelePresence supports, refer to the
Cisco TelePresence System
When you use the audio/video extension unit as a video splitter, connect port 1 of the "Video in"
Note
connection from the presentation codec, and port 4 of the "Video out" connection to the projector.
Cisco TelePresence System
6-16
Chapter 6 Options for the Cisco TelePresence System 3000, 3010, 3200, and 3210
for your software release.
Release Notes for
OL-16441-01