Cisco TelePresence System Series Hardware Upgrade Manual page 164

Converting a System with a Wall-Mounted Reflector Wall to a System with a Free-Standing Reflector Wall
Converting a System with a Wall-Mounted Reflector Wall to a
System with a Free-Standing Reflector Wall
You can convert a system with a wall-mounted reflector wall to one with a Free-standing reflector wall.
The part number for this upgrade kit is CTS-TX9K-WMFS-KIT=.
To order this upgrade kit, contact Customer Service 1-800-553-6387. To complete the upgrade, perform
the following actions:
Remove the wall-mounted reflector wall and the reflector panels. Refer to the
Step 1
Wall-Mounted Reflector Wall Structure"
Assembly, First-Time Setup, and Field-Replaceable Unit Guide
step:
http://www.cisco.com/en/US/docs/telepresence/tx9000/assembly_guide/
tx9000_installing_the_wall_mounted_reflector_wall.html
Perform the steps in reverse. Removal is the opposite of assembly.
Save the panels and do not damage the panels when you remove them. Use gloves and moving blankets
Caution
when handling the panels.
Assemble the free-standing reflector wall by completing the steps in the
Step 2
Reflector Wall Structure"
Assembly, First-Time Setup, and Field-Replaceable Unit Guide
http://www.cisco.com/en/US/docs/telepresence/tx9000/assembly_guide/
tx9000_installing_the_freestanding_reflector_wall.html
Converting a System with a Free-Standing Reflector Wall to a
System with a Wall-Mounted Reflector Wall
You can convert a system with a Free-standing reflector wall to one with a wall-mounted reflector wall.
The part number for this upgrade kit is CTS-TX9K-FSWM-KIT=.
To convert a system with a wall-mounted reflector wall to a system with a free-standing reflector,
complete the following steps:
Remove the free-standing reflector wall and the reflector panels. Refer to the
Step 1
Free-Standing Reflector Wall Structure"
TX9200 Assembly, First-Time Setup, and Field-Replaceable Unit Guide
complete this step:
http://www.cisco.com/en/US/docs/telepresence/tx9000/assembly_guide/
tx9000_installing_the_freestanding_reflector_wall.html
Perform the steps in reverse. Removal is the opposite of assembly.
Cisco TelePresence System
7-2
Chapter 7
chapter of the
chapter of the of the Cisco TelePresence System TX9000 and TX9200
chapter of the of the
Options for the Cisco TelePresence System TX9000 and TX9200
Cisco TelePresence System TX9000 and TX9200
at the following URL to complete this
"Installing the Free-Standing
at the following URL:
"Installing the
Cisco TelePresence System TX9000 and
at the following URL to
"Installing the
OL-16441-01