Cisco TelePresence Presentation Codec
Step 10
Route the power cables for the presentation codec.
Figure 6-14
Presentation Codec Cable Routing
Power
Note
Your installation might differ from this diagram. There might be one PDU on the left side of the display
structure, rather than two; in this case, connect the PDU to either of the PDUs on the left.
Note
The terms left and right refer to the system as you face it from the front.
Cisco TelePresence System
6-18
Chapter 6
Options for the Cisco TelePresence System 3000, 3010, 3200, and 3210
OL-16441-01