Chapter 6
Options for the Cisco TelePresence System 3000, 3010, 3200, and 3210
Upgrading a CTS 3000 to a CTS 3200
Step 2
If your installation uses wired Ethernet for the second row participants, attach the Ethernet cables to the
modules in the foam bumpers and route the Ethernet cables.
Figure 6-74
Ethernet Cable Routing
The Table Leg Signal cables are routed behind the Display structure, along with the other signal cables,
Note
but do not plug into any Codec.
Cisco TelePresence System
6-89
OL-16441-01