Cisco TelePresence System Series Hardware Upgrade Manual page 21

Chapter 2 Options for the Cisco TelePresence System 500-37
Step 11 Reattach the right handle/mounting bracket to the codec assembly.
Figure 2-6 Right Handle/Mounting Bracket and Codec Assembly
8
1
Access the CTS 500 codec by performing one of the following actions:
Step 12
•
•
Removal is the opposite of installation; it can be helpful to review the codec installation instructions in
Tip
the
OL-16441-01
8
For a pedestal stand-mounted CTS 500, lift and remove the codec cover. See Figure 2-14 for more
information.
For a wall-mounted or table stand-mounted CTS 500, remove the codec handle, slide the codec to
the center, and disconnect the codec from the base.
Cisco TelePresence System 500 Assembly, Use & Care, and Field Replaceable Unit
2
Cisco TelePresence Presentation Codec
Guide.
Cisco TelePresence System
2-9