Sw-Download - Cisco ONS 15501 User Manual

sw-download

sw-download
To download an image via ftp or tftp and burn it to a specified Flash bank, use the sw-download
command.
Syntax Description
mode
server-ip
username
password
path
filename
flashbank
passive
Defaults
None
Command Types
Changes configuration
Command Modes Master password protected
Command History Release
EDFA 1.0
Examples
The following example shows how to download an image via ftp and burn it to a specified Flash bank.
edfa > sw-download ftp 209.128.68.145 opruser oprpassword /home/load/bin EdfaImg.0.2 2
The following example shows how to download an image via tftp and burn it to a specified Flash bank.
edfa > sw-download tftp 209.128.68.145 EdfaImg.0.2 2
Cisco ONS 15501 User Guide
4-50
sw-download mode server-ip [username password path] filename flashbank [passive]
Modification
This command was introduced.
Specifies the desired mode. It should be designated as ftp or tftp.
Specifies the IP address of the ftp or tftp server that contains the
image.
Specifies the username to log in to the ftp server. This is not
required for tftp.
Specifies the password of the user. This is not required for tftp.
Specifies the path of the directory that contains the image. This is
not required for tftp.
Specifies the name of the image file.
Specifies the Flash bank where the image is to be burned. It should
be designated as 1, 2, or 3. When burning a new image, the Flash
bank specified cannot be the current Flash bank.
Specifies the string for ftp across a firewall. This is not required for
ftp.
Chapter 4 Command Reference
78-14134-01, Release 1.0