Alarm - Cisco ONS 15501 User Manual

alarm

alarm
To display a list of alarms in the system, use the alarm command.
Syntax Description
This command has no other arguments or keywords.
Defaults None
Command Types
Does not change configuration
Command Modes
User password protected
Command History Release
EDFA 1.0
Examples The following example shows how to display a list of alarms in the system.
edfa > alarm
Alarm: Temperature - Unacceptable
Alarm: Equipment -
Alarm: Input Signal - Low
Cisco ONS 15501 User Guide
4-4
alarm
Modification
This command was introduced.
Chapter 4 Command Reference
78-14134-01, Release 1.0