Add-Snmp-Com - Cisco ONS 15501 User Manual

add-snmp-com

add-snmp-com
To add an SNMP community string to the system, use the add-snmp-com command.
Syntax Description
community-string
Defaults
None
Command Types Changes configuration
Command Modes Master password protected
Command History Release
EDFA 1.0
Usage Guidelines
The Cisco ONS 15501 supports up to 16 SNMP community strings.
Examples The following example shows how to add an SNMP community string to the system.
edfa > add-snmp-com abcd
Related Commands Command
del-snmp-com
get-snmp-com
Cisco ONS 15501 User Guide
4-2
add-snmp-com community-string
Modification
This command was introduced.
Description
Deletes an SNMP community string in the system.
Displays an SNMP community string in the system.
Specifies the SNMP community string to be added to the system. The
string can be comprised of any alphanumeric combination. The
maximum number of characters allowed is 22.
Chapter 4 Command Reference
78-14134-01, Release 1.0