show-trap
show-trap
To display the trap message, use the show-trap command.
Syntax Description
This command has no other arguments or keywords.
Defaults
None
Command Types
Does not change configuration
Command Modes
User password protected
Command History
Release
EDFA 1.0
Examples
The following example shows how to display the trap message.
edfa > show-trap
Related Commands
Command
show-trap
Cisco ONS 15501 User Guide
4-48
show-trap
Modification
This command was introduced.
Description
Hides the trap message.
Chapter 4
Command Reference
78-14134-01, Release 1.0