Get-Snmp-Com - Cisco ONS 15501 User Manual

get-snmp-com

get-snmp-com
To display the SNMP community strings in the system, use the get-snmp-com command.
Syntax Description
community-string
Defaults Displays all SNMP community strings in the system
Command Types
Changes configuration
Command Modes
Master password protected
Command History Release
EDFA 1.0
Examples The following example shows how to display an SNMP community string in the system.
edfa > get-snmp-com abcd
A list of the SNMP community string
=======================================
private
abcd
Related Commands Command
add-snmp-com
del-snmp-com
Cisco ONS 15501 User Guide
4-12
get-snmp-com community-string
Modification
This command was introduced.
Description
Adds an SNMP community string to the system.
Deletes an SNMP community string on the system.
Specifies the SNMP community string to be displayed.
Chapter 4 Command Reference
78-14134-01, Release 1.0