Add-Snmp-Mgr - Cisco ONS 15501 User Manual

Chapter 4 Command Reference

add-snmp-mgr

To add or modify an SNMP manager entry on the system, use the add-snmp-mgr command.
Syntax Description
manager-ip
Defaults None
Command Types
Changes configuration
Command Modes
Master password protected
Command History Release
EDFA 1.0
Usage Guidelines The Cisco ONS 15501 uses the SNMP manager address to direct SNMP trap and inform notifications.
No notifications are sent unless at least one SNMP manager address is configured. The
Cisco ONS 15501 accepts a maximum of 10 IP managers.
Examples The following example shows how to add an SNMP manager entry on the system.
edfa > add-snmp-mgr 10.1.2.71
Related Commands Command
del-snmp-mgr
get-snmp-mgr
78-14134-01, Release 1.0
add-snmp-mgr manager-ip
Modification
This command was introduced.
Description
Deletes an SNMP manager entry on the system.
Displays an SNMP manager entry on the system.
Specifies the IP address of the host running the SNMP manager.
add-snmp-mgr
Cisco ONS 15501 User Guide
4-3