Boot-Bank - Cisco ONS 15501 User Manual

Chapter 4 Command Reference

boot-bank

To display the active and planned boot bank or modify the active boot bank, use the boot-bank
command.
Syntax Description
flash-bank
Defaults
Displays the active boot bank
Command Types Changes configuration
Command Modes Master password protected
Command History Release
EDFA 1.0
Usage Guidelines
The active boot bank is the Flash bank from which the system has been booted. The planned boot bank
is the Flash bank from which the system will next be booted.
Examples The following example shows how to modify the active boot bank.
edfa > boot-bank 2
The following example shows how to display the active boot bank.
edfa > boot-bank
Active flash bank number: 1
Planned flash bank number: 1
78-14134-01, Release 1.0
boot-bank [flash-bank]
Modification
This command was introduced.
Specifies the Flash bank from which the system is booted. This should
be 1, 2, or 3.
boot-bank
Cisco ONS 15501 User Guide
4-5