Chapter 4
Command Reference
outattn
To display the measured output attenuation, use the outattn command.
Syntax Description
This command has no other arguments or keywords.
Defaults
None
Command Types
Does not change configuration
Command Modes
User password protected
Command History
Release
EDFA 1.0
Usage Guidelines
The value for optical output attenuation is displayed in dB.
Examples
The following example shows how to display the measured output attenuation.
edfa > outattn
0.00 (dB)
78-14134-01, Release 1.0
outattn
Modification
This command was introduced.
Cisco ONS 15501 User Guide
outattn
4-25