Appendix A - Installing Rtp - Honeywell ControlEdge 900 platform Hardware Planning And Installation Manual

APPENDIX
A
INSTALLING RTP
CAUTION: Do not insert or remove the RTP when the system is powered unless
the area is known to be non-hazardous.
In this section:
Overview of RTPs
RTP Dimension
Using the RTP to field wire the IOMs
Using an RTP to field wire the UIO
Using an RTP to field wiring the UAI
Using Dual RTPs to field wiring the 16 Point AI
Using an RTP to field wiring the 16 Point AC DI
Using an RTP to field wiring the 16 Point DC DI
Using Dual RTPs to field wiring the 32 Point DC DI
Using an RTP to field wiring the 8 Point AC DO
Using Dual RTPs to field wiring the 32 Point DC DO
Using an RTP to field wiring 4 Channel Analog Output
Using an RTP to field wiring the 8 Channel Analog Output
Using an RTP to field wiring Relay Output
RTP Cable wire positions, colors, and internal schematic
Securing the RTP to the DIN rail
186
187
188
189
191
196
199
202
204
207
210
212
214
217
219
228
185