Default Port Numbers - Honeywell ControlEdge 900 platform Hardware Planning And Installation Manual

Table 3-1: Default port numbers
Port number Port number type
41103
24558
9050
123
123
68
500
4500
55601
55602
80
16
Modbus TCP Slave
n
OPC UA Server
n
HART IP
n
ControlEdge Builder Controller Configuration protocol
n
Privacy protocol
n
SNTP (if NTP server is enabled)
n
Destination DHCP for uplink
n
Modbus Master and OPC UA Client that configured in the relative
n
function blocks
CDA Responder
n
The port number can be configured in ControlEdge Builder, and see
the following table for the default port numbers.
Fixed destination port
Fixed destination port
Fixed source port
Fixed source port
Fixed destination port
Fixed destination port
Fixed destination/source port
Fixed source port
Fixed destination port
Fixed destination port
Fixed source port
Description
Builder protocol
Discovery protocol
Discovery protocol
SNTP protocol
SNTP protocol
DHCP Client for uplink
IPSec for uplink (IKE ports)
IPSec for uplink(IKE ports)
IPSec for uplink(CertMngr cleartext)
IPSec for uplink(CertMngr encryption)
IPSec for uplink (SCEP)