Special Terms - Honeywell ControlEdge 900 platform Hardware Planning And Installation Manual

Chapter 1 - About this guide
Item
ControlEdge
UOC
Terminology Description
AI
AO
CEE
ControlEdge
900
ControlEdge
Builder
Control
Builder
COTS
CPM
DCS
DI
DLR
DO
EPM
Expansion
I/O rack
Ethernet/IP
10
ControlEdge 900 controllers running the Honeywell control execution
environment (CEE) configured with Experion Control Builder.

Special Terms

The following table describes the commonly used industry-wide and
Honeywell-specific terminology:
Analog Input
Analog Output
Control Execution Environment (Experion)
A family of controller and I/O hardware which can be assembled to
create PLC or UOC systems.
Software configuration tool for PLC.
Experion Control Builder, configuration tool for UOC.
Commercial Off the Shelf
Control Processor Module (commonly referred to as the controller).
The ControlEdge 900 CPM, can be loaded with PLC firmware to
become the PLC or with UOC-CPM firmware to become the UOC-
CPM.
Distributed Control System
Digital Input
Device Level Ring
Digital Output
Expansion Processor Module (used to connect multiple I/O racks to
the Control Processor Module)
I/O rack with EPM installed
EtherNet/IP™ is a trademark protocol owned by ODVA.
Description