Honeywell ControlEdge 900 platform Hardware Planning And Installation Manual page 104

104
3. For each configured and labeled I/O Module, ONLY break off the
"key-tabs" in the pattern that matches that module type. (For a
diagram of each key-tab pattern, use the I/O Modules or UIO
keying example diagram shown below).
CAUTION:
In the diagram below, the white cut-outs represent the cut-
outs on the modules that accommodate tabs on the
Terminal Block. That is, all key-tabs that line up with the
white cut-outs on the diagram should be retained, and all
other tabs should be removed. The orientation of the
diagrams below corresponds to the picture of the terminal
block, shown in the previous picture.