Table 5-14: UIO specification of different hardware versions
Item
ControlEdge Builder
Display*
AO Channel Specs
without DO channels
used
110
In above diagram, each power supply source supplies power to the
whole module. If redundant power supply are provided, the UIO
module still can work in case of failure on one power source.
At least one power supply is required, otherwise UIO module cannot
work and "External power" error is reported.
ATTENTION:
Calibrate the power output at 24 V DC to limit the PWB thermal
rise.
See the following table for the UIO specification of different hardware
versions:
Hardware Version B
Version 01.00
Maximum of 5 into 100 ohms with no
other channels configured
Hardware Version
D/E
Version 02.00
No load
restrictions: