Call Setup Thresholds - Cisco ASR 5000 Series Thresholding Configuration Manual

Chapter 4

Call Setup Thresholds

Threshold monitoring can be enabled for the call setup values described in the following table.
Value
Number of calls setup
Number of call setup failures
RP setup failure rate
PPP setup failure rate
Number of calls rejected due to
no processing resources being
available
OL-25552-02
Description
Enables the generation of alerts or alarms based on the number of calls
setup by the system during the polling interval.
Enables the generation of alerts or alarms based on the number of call
setup failures experienced by the system during the polling interval.
Enables the generation of alerts or alarms based on the rate at which RP
failures are experienced by the system during the polling interval.
Enables the generation of alerts or alarms based on the rate at which PPP
failures are experienced by the system during the polling interval.
Enables the generation of alerts or alarms based on the number of calls
rejected by the system due to insufficient resources (memory and/or
session licenses) during the polling interval.
Cisco ASR 5000 Series Thresholding Configuration Guide ▄
To configure, go to
section:
Call Setup
Thresholds
Call Setup Failure
Thresholds
RP Setup Failure
Rate Thresholds
PPP Setup Failure
Rate Thresholds
No Resource Call
Reject Thresholds
33