Aaa Request Message Retry Rate Thresholds; Configuring Aaa Authentication Failure Rate Threshold - Cisco ASR 5000 Series Thresholding Configuration Manual

AAA Thresholds

AAA Request Message Retry Rate Thresholds

AAA request message retry rate thresholds generate alerts or alarms based on the percentage of request messages (both
authentication and accounting) that were retried during the specified polling interval. The percentage is based on a
message count taken for all AAA authentication and accounting servers that the system is configured to communicate
with.
Alerts or alarms are triggered for request message retries based on the following rules:
Enter condition: Actual failure percentage > or = High Threshold
Clear condition: Actual failure percentage < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end of the
polling interval.

Configuring AAA Authentication Failure Rate Threshold

Use the following example for configuring AAA request message retriy rate threshold:
configure
threshold aaa-retry-rate <high_thresh>[ clear <low_thresh> ]
threshold poll aaa-retry-rate interval
threshold monitoring aaa-retry-rate
end
OL-25552-02
AAA Request Message Retry Rate Thresholds ▀
<time>
Cisco ASR 5000 Series Thresholding Configuration Guide ▄
27