Processing Card Cpu Utilization Thresholds; Configuring Processing Card Cpu Utilization Thresholds - Cisco ASR 5000 Series Thresholding Configuration Manual

▀ Processing Card CPU Utilization Thresholds

Processing Card CPU Utilization Thresholds
CPU utilization thresholds generate alerts or alarms based on the utilization percentage of each processing card CPU
during the specified polling interval. Although, a single threshold is configured for all processing card CPUs, separate
alerts or alarms can be generated for each CPU.
Alerts or alarms are triggered for processing card CPU utilization based on the following rules:
Enter condition: Average measured CPU utilization for last 5 minutes > or = High Threshold
Clear condition: Average measured CPU utilization for last 5 minutes < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end of the
polling interval.

Configuring Processing Card CPU Utilization Thresholds

Use the following example for configuring processing card CPU utilization thresholding.
configure
threshold cpu-utilization <high_thresh> [ clear <low_thresh> ]
threshold poll cpu-utilization interval <time>
threshold monitoring cpu-resource
end
▄ Cisco ASR 5000 Series Thresholding Configuration Guide
52
CPU Resource Thresholds
OL-25552-02