System Management Card Cpu Utilization Thresholds; Configuring System Management Card Cpu Utilization Thresholds - Cisco ASR 5000 Series Thresholding Configuration Manual

▀ System Management Card CPU Utilization Thresholds

System Management Card CPU Utilization Thresholds
CPU utilization thresholds generate alerts or alarms based on the utilization percentage of each system management
card CPU during the specified polling interval. Although, a single threshold is configured for both system management
card CPUs, separate alerts or alarms can be generated for each CPU.
Alerts or alarms are triggered for system management card CPU utilization based on the following rules:
Enter condition: Average measured CPU utilization for last 5 minutes > or = High Threshold
Clear condition: Average measured CPU utilization for last 5 minutes < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end of the
polling interval.

Configuring System Management Card CPU Utilization Thresholds

Use the following example for configuring system management card CPU utilization thresholding.
configure
threshold mgmt-cpu-utilization <high_thresh> [ clear <low_thresh> ]
threshold poll mgmt-cpu-utilization interval <time>
threshold monitoring cpu-resource
end
▄ Cisco ASR 5000 Series Thresholding Configuration Guide
54
CPU Resource Thresholds
OL-25552-02