Cisco ASR 5000 Series Thresholding Configuration Manual page 17

Thresholding Overview
PPP setup failure rate
Number of calls rejected due to no processing resources being available
MME Service
Number of MME Authentication failures
Number of MME Session Attachment failures
Number of MME sessions
PAC/PSC CPU resource availability:
10 second sample utilization
Percent utilization
Available memory
Load
Memory usage
Session throughput
SPC/SMC CPU resource availability:
Memory usage
Percent utilization
ORBS software task utilization
IP address pool utilization
Licensed session utilization
Packet processing:
Number of packets filtered/dropped
Number of packets forwarded to CPU
Per-service session count
Port utilization:
High activity
Transmit utilization
Receive utilization
Subscriber number:
Total number
Number active
Total session count
SPC/SMC CompactFlash memory utilization
Thresholding reports conditions using one of the following mechanisms:
SNMP traps: SNMP traps have been created that indicate the condition (high threshold crossing and/or clear) of
each of the monitored values. Complete descriptions and other information pertaining to these traps is located
in the starentMIB(8164).starentTraps(2) section of the SNMP MIB Reference.
The generation of specific traps can be enabled or disabled on the system allowing you to view only those traps
that are most important to you.
OL-25552-02
Cisco ASR 5000 Series Thresholding Configuration Guide ▄
Additional Information ▀
17