High Port Activity Thresholds; Configuring High Port Activity Thresholds - Cisco ASR 5000 Series Thresholding Configuration Manual

Port Utilization Thresholds

High Port Activity Thresholds

High port activity thresholds generate alerts or alarms based on the peak utilization percentage of each configured port
during the specified polling interval. This threshold is configured on a per-port basis.
Alerts or alarms are triggered for high port activity based on the following rules:
Enter condition: Actual percent peak utilization of a port > or = High Threshold
Clear condition: Actual percent peak utilization of a port < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end of the
polling interval.

Configuring High Port Activity Thresholds

Use the following example to configure the polling interval over which to measure for high port activity:
configure
threshold poll port-high-activity interval <time>
port <port-type>
threshold high-activity <high_thresh_%> [ clear
threshold monitoring
end
OL-25552-02
<slot#/port#>
<low_thresh_%> ]
Cisco ASR 5000 Series Thresholding Configuration Guide ▄
High Port Activity Thresholds ▀
127