Cscf Service Thresholds - Cisco ASR 5000 Series Thresholding Configuration Manual

Chapter 7

CSCF Service Thresholds

CSCF Service thresholds generate alerts or alarms for the average number of calls setup. A threshold can be configured
to report this information for an individual CSCF service. Thresholds can also be configured for several other conditions
for individual CSCF services.
Alerts or alarms are triggered for these CSCF thresholds based on the following rules:
Enter condition: Actual average of call setups or actual number of errors > or = High Threshold
Clear condition: Actual average of call setups or actual number of errors < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm is not generated until the end of the polling
interval. Polling intervals are set on a system level.
OL-25552-02
Cisco ASR 5000 Series Thresholding Configuration Guide ▄
57