Per-Ggsn Service Thresholds; Configuring Per-Ggsn Service Thresholds - Cisco ASR 5000 Series Thresholding Configuration Manual

Per-service Session Thresholds

Per-GGSN Service Thresholds

Per-GGSN service thresholds generate alerts or alarms based on the total number of PDP contexts facilitated by any
GGSN service configured on the system during the specified polling interval.
Alerts or alarms are triggered for sessions per-GGSN service based on the following rules:
Enter condition: Actual total number of PDP contexts > or = High Threshold
Clear condition: Actual total number of PDP contexts < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end of the
polling interval.

Configuring Per-GGSN Service Thresholds

Use the following example to configure the per-GGSN service thresholds:
configure
threshold per-service-ggsn-sessions <high_thresh> [ clear <low_thresh> ]
threshold poll per-service-ggsn-sessions interval <time>
threshold monitoring subscriber
end
OL-25552-02
Cisco ASR 5000 Series Thresholding Configuration Guide ▄
Per-GGSN Service Thresholds ▀
117