Active Subscriber Thresholds; Configuring Active Subscriber Thresholds - Cisco ASR 5000 Series Thresholding Configuration Manual

▀ Active Subscriber Thresholds

Active Subscriber Thresholds
Active subscriber thresholds generate alerts or alarms based on the total number of active subscriber sessions facilitated
by the system during the specified polling interval.
Alerts or alarms are triggered for active subscriber totals based on the following rules:
Enter condition: Actual total number of active subscriber sessions > or = High Threshold
Clear condition: Actual total number of active subscriber sessions < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end of the
polling interval.
This section provides instructions for configuring active subscriber thresholding. These instructions assume that you are
at the prompt for the Global Configuration mode:

Configuring Active Subscriber Thresholds

Use the following example to configure the active subscriber thresholds:
configure
threshold subscriber active <high_thresh> [ clear
threshold poll active-subscriber interval <time>
threshold monitoring subscriber
end
▄ Cisco ASR 5000 Series Thresholding Configuration Guide
140
<low_thresh> ]
Subscriber Thresholds
OL-25552-02