▀ Configuring Content Filtering Thresholds
Configuring Content Filtering Thresholds
This section describes how to enable and configure Content Filtering thresholds.
Enabling Thresholds
To enable thresholds use the following configuration:
configure
threshold monitoring content-filtering
end
Configuring Threshold Poll Interval
To configure threshold poll interval use the following configuration:
configure
threshold poll contfilt-block interval <interval>
threshold poll contfilt-rating interval
end
Configuring Threshold Limits
To configure threshold limits use the following configuration:
configure
threshold contfilt-block <high_thresh>
threshold contfilt-rating <high_thresh>
end
▄ Cisco ASR 5000 Series Thresholding Configuration Guide
42
<interval>
[ clear <low_thresh> ]
[ clear <low_thresh> ]
Content Filtering Thresholds
OL-25552-02