Diameter Retry Rate Threshold; Configuring Diameter Retry Rate Threshold - Cisco ASR 5000 Series Thresholding Configuration Manual

▀ Configuring Diameter Thresholds
threshold dcca-unknown-rating-group <high_thresh> [ clear
threshold poll dcca-unknown-rating-group interval <seconds>
threshold monitoring ecs
end

Diameter Retry Rate Threshold

Diameter Retry Rate threshold generates alerts or alarms based on the percentage of Diameter requests that were re-tried
during the polling interval.
Alerts or alarms are triggered based on the following rules:
Enter condition: Percentage of Diameter requests retried > or = High Threshold
Clear condition: Percentage of Diameter requests retried < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end of the
polling interval.

Configuring Diameter Retry Rate Threshold

To configure the Diameter Retry Rate threshold use the following configuration:
configure
threshold diameter diameter-retry-rate <high_thresh> [ clear
threshold poll diameter-retry-rate interval
threshold monitoring diameter
end
▄ Cisco ASR 5000 Series Thresholding Configuration Guide
66
<low_thresh> ]
<low_thresh> ]
<seconds>
Diameter Thresholds
OL-25552-02