Processing Card Cpu Load Thresholds; Configuring Processing Card Cpu Load Thresholds - Cisco ASR 5000 Series Thresholding Configuration Manual

CPU Resource Thresholds

Processing Card CPU Load Thresholds

CPU load thresholds generate alerts or alarms based on a five-minute average of processing card CPU load during the
polling interval. Although, a single threshold is configured for all processing card CPUs, separate alerts or alarms can be
generated for each CPU.
Alerts or alarms are triggered for CPU load based on the following rules:
Enter condition: 5 minute average CPU load > or = High Threshold
Clear condition: 5 minute average CPU load < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end of the
polling interval.

Configuring Processing Card CPU Load Thresholds

Use the following example for configuring processing card CPU load thresholding.
configure
threshold cpu-load <high_thresh> [ clear <low_thresh> ]
threshold poll cpu-load interval <time>
threshold monitoring cpu-resource
end
OL-25552-02
Processing Card CPU Load Thresholds ▀
Cisco ASR 5000 Series Thresholding Configuration Guide ▄
49