Clear All Codes
If you want to clear the scanner's buffer of all data accumulated in Batch Mode,
scan Clear All Codes.
Transmit Records to Host
If you are operating in Inventory Batch Mode (see
32), you must scan the following bar code to transmit all the stored data to the host
system.
Batch Mode Transmit Delay
Sometimes when accumulated scans are sent to the host system, the transmission
of those scans is too fast for the application to process. To program a transmit
delay between accumulated scans, scan one of the following delays. Default = Off.
Note: In most cases, a short (250 ms (milliseconds)) delay is ideal, however, longer delays
may be programmed. Contact Technical Support
* Batch Mode Transmit Delay Off
Batch Mode Transmit Delay Medium
36
Clear All Codes
(No Delay)
(500 ms)
Inventory Batch Mode
Transmit Inventory Records
(page
iii) for additional information.
Batch Mode Transmit Delay Short
(250 ms)
Batch Mode Transmit Delay Long
(1000 ms)
8680i User Guide
on page