Beeper Pitch - Error; Beeper Duration - Good Read - Honeywell 8680i User Manual

Vibrate Duration
If you want to set the length for the good read vibration, scan the bar code below,
then set the duration (from 100 - 2,000 milliseconds) by scanning digits, then the
Save bar code from the
Beeper Pitch – Error
The beeper pitch codes modify the pitch (frequency) of the sound the 8680i emits
when there is a bad read or error. Default = Razz.
Beeper Duration – Good Read
The beeper duration codes modify the length of the beep the 8680i emits on a
good read. Default = Normal.
44
Programming Chart
* Razz (250 Hz)
High (4200 Hz)
* Normal Beep
on page 235. Default = 300 ms.
Vibrate Duration
Medium (3250 Hz)
Short Beep Short Beep
8680i User Guide