Telepen - Honeywell 8680i User Manual

GS1-128 Message Length
Scan the bar codes below to change the message length. Refer to
Description
lengths = 1-80. Minimum Default = 1, Maximum Default = 80.
Minimum Message Length

Telepen

Telepen On/Off
Telepen Output
Using AIM Telepen Output, the 8680i reads symbols with start/stop pattern 1 and
decodes them as standard full ASCII (start/stop pattern 1). When Original Telepen
Output is selected, the 8680i reads symbols with start/stop pattern 1 and decodes
them as compressed numeric with optional full ASCII (start/stop pattern 2).
Default = AIM Telepen Output.
112
(page 94) for additional information. Minimum and Maximum
On
* AIM Telepen Output
<Default All Telepen Settings>
Message Length
Maximum Message Length
* Off
8680i User Guide