MSI Check Character
Different types of check characters are used with MSI bar codes. You can program
the 8680i to read MSI bar codes with Type 10 check characters. Default = Validate
Type 10, but Don't Transmit.
When Check Character is set to Validate Type 10/11 and Transmit, the 8680i only
reads MSI bar codes printed with the specified type check character(s), and trans-
mits the character(s) at the end of the scanned data.
When Check Character is set to Validate Type 10/11, but Don't Transmit, the unit
only reads MSI bar codes printed with the specified type check character(s), but
does not transmit the check character(s) with the scanned data.
* Validate Type 10, but Don't
Validate 2 Type 10 Characters,
Validate Type 11 then Type 10
Character, but Don't Transmit
Disable MSI Check Characters
130
Transmit
but Don't Transmit
Validate Type 10 and Transmit
Validate 2 Type 10 Characters
and Transmit
Validate Type 11 then
Type 10 Character and Transmit
8680i User Guide