Flexible Power Management - Honeywell 8680i User Manual

If there are no trigger presses during the timer interval, the 8680i goes into power
down mode. Whenever the trigger is pressed, the timer is reset. The 8680i does not
go into power down mode when the battery is charging. Default = 3600 seconds.
Note: When the 8680i is in power down mode, press the trigger to power the unit back up.
There is a set of power up beeps and a delay of up to a few seconds for the radio to
join. The 8680i is then ready to use.

Flexible Power Management

If you are experiencing network performance issues and suspect the 8680i is inter-
fering with other devices, you can turn down the power output of the 8680i. This
reduces the range between the 8680i and a host as shown in the following illustra-
tion:
30
0 seconds
400 seconds
* 3600 seconds
802.11
Scanner
LAN
200 seconds
900 seconds
7200 seconds
8680i User Guide