Dolphin CT50 HealthCare and All Other Versions
The Healthcare version of the Dolphin CT50 uses battery Model CT50-BTSC, part
number 318-055-008.
All other versions of the Dolphin CT50 use battery Model CT50-BTSC, part number
318-055-005.
Charge Before Use
Make sure you fully charge the battery before you use your computer. You can
charge the battery before or after you install it in the computer. It takes about
6 hours for the battery to fully charge in any of the accessories
•
or
•
Change the Battery
If your battery power is low, you need to either charge the battery in the computer,
or replace it with a charged battery.
1. Save your files and close any open applications.
2. Press and hold the Power button. This screen appears:
3. Tap Power off. A screen appears informing you that the computer is shutting
Dolphin CT50 powered by Android 6.0 User Guide
Insert the battery into a Quad Battery Charger or the battery well of an
eHomeBase.
Insert the computer with the battery installed into an eHomeBase, ChargeBase,
NetBase, Quad Battery Charger, USB Adapter, or Vehicle Power Adapter.
down.
5