Configure The 8680I With Ezconfig For Scanning - Honeywell 8680i User Manual

3. In the VoiceConsole, set the Vocollect device to:
4. Simple scan-based pairing can be accomplished by creating a dedicated
5. The Bluetooth symbol changes from crossed out or flashing to continuously lit

Configure the 8680i with EZConfig for Scanning

Use the EZConfig for Scanning tool to configure your 8680i online:
1. Access the Honeywell Technical Support Downloads Portal at
2. Go to Software > Barcode Scanners > Software > Tools and Utilitites >
8680i User Guide
scanning the following bar code:
See Suffix Selections
• Pairing type Bluetooth Scanner
• Connection mode Device listens for peripheral connection
• Security type Disabled
pairing bar code and applying it to each Vocollect device. The EZPairing bar
code begins with {FNC3} LnkB, followed by 12 digits, like the sample below.
in the user window status screen when the 8680i pairs with a host. (See
and Bluetooth Status.) Once the 8680i battery is charged and you have paired
it to a host device, you may begin scanning bar codes. Verify the 8680i
operation by scanning a bar code from the
233.
hsmftp.honeywell.com.
EZConfig for Scanning > Current.
CR/LF Suffix
if you require other termination characters.
Sample Symbols, beginning on page
WiFi
https://
19