Interfunction Delay; Intermessage Delay - Honeywell 8680i User Manual

Interfunction Delay

An interfunction delay of up to 5000 milliseconds (in 5ms increments) may be
placed between the transmission of each control character in the message string.
Scan the Interfunction Delay bar code below, then scan the number of 5ms
delays, and the Save bar code from the
235.
To remove this delay, scan the Interfunction Delay bar code, then set the number
of delays to 0. Scan the Save bar code from the
page 235.

Intermessage Delay

An intermessage delay of up to 5000 milliseconds (in 5ms increments) may be
placed between each scan transmission. Scan the Intermessage Delay bar code
below, then scan the number of 5ms delays, and the Save bar code from the
Programming Chart,
To remove this delay, scan the Intermessage Delay bar code, then set the number
of delays to 0. Scan the Save bar code from the
page 235.
72
Programming Chart,
Prefix Scanned Data
STX 1 HT 2 3 4 5
Interfunction Delays
Interfunction Delay
beginning on page 235.
1st Scan Transmission
Intermessage Delay
Intermessage Delay
beginning on page
Suffix
CR LF
Programming Chart,
2nd Scan Transmission
Programming Chart,
beginning on
beginning on
8680i User Guide