Good Read Tone - Output Sequences - Honeywell 8680i User Manual

edited sequence but, if it cannot, the 8680i transmits all output data to the host
device as is, or formatted according to the partial sequence output format (see
Partial Sequence
When the output sequence is Off, the bar code data is output to the host as the
8680i decodes it. Default = Off.
Note: This selection is unavailable when the Multiple Symbols Selection is turned on.

Good Read Tone - Output Sequences

The 8680i may be programmed to either beep or click in response to a good read of
each bar code in an output sequence, or to emit a beep or error tone for a partial
sequence. Default = Good Read Click - Each Code in Sequence and Error Tone - Par-
tial Sequence Output.
,
Good Read Beep - Each
Good Read Beep - Partial
62
on page 59).
Required
*Off
Code in Sequence
Sequence Output
On/Not Required
* Good Read Click - Each
Code in Sequence
* Error Tone - Partial
Sequence Output
8680i User Guide