Unlink A Scanner; Override Locked Scanner; Out-Of-Range Alarm; Alarm Sound Type - Honeywell 8680i User Manual

Unlink a Scanner

If a host has an 8680i linked to it, that 8680i must be unlinked before a new 8680i
can be linked. Once the previous 8680i is unlinked, it no longer communicates with
the host. To unlink the 8680i from a host, scan the Unlink Scanner bar code below.

Override Locked Scanner

If you need to replace a broken or lost 8680i that is linked to a host, scan the Over-
ride Locked Scanner bar code below with a new 8680i and pair that 8680i with the
host. The locked link is overridden; the broken or lost 8680i's link with the host is
removed, and the new 8680i is linked.

Out-of-Range Alarm

If your 8680i is out range of the host, an alarm sounds from the 8680i. The alarm
stops when the 8680i is moved closer to the host, when the host links to another
8680i, or when the alarm duration expires. To set the alarm duration, scan the bar
code below and then set the time-out duration (from 0-3000 seconds) by scanning
digits, then the Save bar code from the
0 sec (no alarm).
Note: If you are out of range when you scan a bar code, you will receive an error tone even if
you do not have the alarm set because the data could not be sent to the host.

Alarm Sound Type

Change the alarm type by scanning the following bar code and then scanning a
digit (0-7) bar code and the Save bar code on the
on page 235. Default = 0.
28
Unlink Scanner
Override Locked Scanner
(Single Scanner)
Programming Chart
Scanner Alarm Duration
Programming Chart,
on page 235. Default =
beginning
8680i User Guide