4.14 Add An I/O Channel To A Control Module - Honeywell C300 User Manual

4. C300 Controller Configuration
4.14. Add an I/O Channel to a Control Module
6
Click Close.

4.14 Add an I/O Channel to a Control Module

An IO Channel block represents a channel in one of the various Series 8 IO modules
(IOMs). The IO Channel blocks can be added to a control module in the Project tab to
build a process control strategy.
The procedure is a drag and drop operation and is the same for any type IO Channel, for
example for an AI channel in a Series 8 IO module
Prerequisites

Control Builder is running

Tree windows are open
Considerations

All illustrations used in the procedure are for example purposes only.

Blocks appear as Block Symbols on the Control Module chart.
84 Series 8 C300 Controller User's Guide
Honeywell
The dialog box closes and assigned
components now appear in IOLINK folder
in Project tab.
R500
April 2017