Honeywell C300 User Manual page 109

Plain Text
Max Number of FTE
Nodes
Max Device Index
IP Checksum Errors
UDP Checksum
Errors
LAN_A (Yellow)
Failed
(not used in this
release)
LAN_B (Green)
Failed
(not used in this
release)
InterLAN Comm
Failed
R500
April 2017
Parameter Name
MAXFTENODES
MAXNODEID
BADIPCSUM
BADUDPCSUM
LANAFAILED
LANBFAILED
INTERLANFAILED
Series 8 C300 Controller User's Guide
Honeywell
5. C300 Configuration Form Reference
5.1. C300 Controller Block
User
Configurable
No Maximum number of FTE
nodes that have been
detected within FTE
community.
No Highest Device Index
supported within FTE
community.
No Number of FTE IP
messages which were
received but determined
as having bad IP
checksums.
No Number of FTE UDP
messages which were
received but determined
as having bad UDP
checksums.
No Status indicator for port A
(Yellow Tree Port) on the
FTE Bridge. If this LED is
lit, it is an indication that
communications have
failed on Port A.
No Status indicator for port B
(Green Tree Port) on the
FTE Bridge. If this LED is
lit, it is an indication that
communications have
failed on Port B.
No Status indicator for Inter-
LAN communications -
indicates that inter-LAN
communications have
failed.
Notes
103