Honeywell C300 User Manual page 92

5. C300 Configuration Form Reference
5.1. C300 Controller Block
Plain Text
Tag Name
Item Name
Application Image
Version
Controller Command
Network Address Configuration
Device Index
Ethernet IP Address
State Information
Controller State
Redundancy Role
88
Parameter Name
Tag Name
Item Name
IMAGEVER
C300COMMAND
DEVICEIDX
IPADDRESS
C300STATE
RDNROLESTATE
Series 8 C300 Controller User's Guide
Honeywell
User
Configurable
Project Only System assigned or user
configured unique name.
Consisting of up to 16
characters and at least
one character must be a
letter (A-Z).
Project Only A non-unique name by
which an entity is known
within the context of the
enterprise model.
No Identifies current version
of application firmware
installed in module.
Monitoring Allows user to initiate
Only commands to a C300
Controller.
Project Only - Unique FTE Device Index
Matches
of the C300 Controller.
Hardware
Set on the C300 IOTA
Setting switches.
No IP address of the C300
Controller, derived as the
Embedded FTE Base
Ethernet IP Address and
the configured Device
Index.
No Shows C300 Controller's
current module state.
No
Shows C300 Controller's
current redundancy role.
Notes
R500
April 2017